Why is my new faucet experiencing reduced water flow? The old faucet actually has a better water volume.

In order to comply with EPA standards implemented in 1994, all new faucets contain restrictors, while older faucets manufactured before this time did not.

In addition to flow restrictors, newly installed faucets may experience reduced flow if the water supply lines were not flushed prior to installation.

If you wish to remove the flow restrictor please follow these 4 steps:

1. Plug the sink with a paper towel or small hand towel. This is the best way to ensure little pieces that suddenly get loose won’t make their way down the drain.
2. Unscrew the aerator from the end of the faucet. This can usually be done by hand, but you may need the help of a small wrench if it is very tight. You can use a cloth, or rubber band, between the faucet and the wrench to avoid scratching the faucet.
3. Identify and remove the flow restrictor. It should be just inside the aerator and can be easily removed either by hand or with the help of a small screwdriver.
4. Reinstall the aerator.